DeWalt DWE575SB vs Makita 5007MGA: Corded Circular Saws Compared
FriendsWithTools.io earns a commission from qualifying purchases made through links on this page, at no additional cost to you. We do not test these tools ourselves — all claims are sourced from manufacturer specifications, retailer listings, and aggregated user reviews, each linked inline. Prices and ratings were verified on April 2026 and may have changed.
Corded circular saws still outsell cordless for a reason: unlimited runtime and consistent power. The DeWalt DWE575SB and Makita 5007MGA are both 15-amp, 7-1/4 inch saws that'll rip through a stack of 2x12s without slowing down. The DWE575SB is the lightweight contender at 8.8 lb. The 5007MGA is the magnesium-everything build that prioritizes cut accuracy over portability.
Quick Verdict
The Makita 5007MGA is the more precise saw. The magnesium base, higher RPM, and dust port make it the better choice for finish carpentry and shop work where cut quality and dust control matter. The DeWalt DWE575SB is nearly 2 lb lighter, which is a real advantage when you're carrying a saw around a jobsite all day. For framing and rough work, save your shoulder and get the DeWalt.
8.8 lb is noticeably lighter for one-handed cuts on rafters and headers. Cut quality is secondary here.
5,800 RPM and a flat magnesium shoe produce cleaner cuts in hardwood and plywood.
Dust port hooks to a shop vac. The DeWalt's blower just redistributes the mess.
1.8 lb lighter. When you're climbing scaffolding, that difference is obvious.
Specs at a Glance
| Spec | DeWalt DWE575SB | Makita 5007MGA |
|---|---|---|
| Blade Size | 7-1/4 in | 7-1/4 in |
| Depth of Cut (90 deg) | 2-9/16 in | 2-1/2 in |
| Depth of Cut (45 deg) | 1-7/8 in | 1-3/4 in |
| No-Load Speed | 5,200 RPM | 5,800 RPM |
| Motor | 15 Amp | 15 Amp |
| Weight | 8.8 lb | 10.6 lb |
| Dust Management | Integrated dust blower | Dust port (shop vac compatible) |
| Base Plate | Stamped aluminum | Magnesium base |
DeWalt DWE575SB
Price: $129 (Home Depot)
Pros
- 8.8 lb makes it the lightest 7-1/4 inch corded saw from any major brand
- Integrated dust blower keeps the cut line visible without stopping to blow chips
- 2-9/16 inch depth at 90 degrees handles 3x lumber in a single pass
Cons
- Stamped aluminum shoe can flex slightly under heavy bevel cuts
- Dust blower has no off switch, which sends chips everywhere when you just want them to fall
- Electric brake is slower to stop than the Makita
Makita 5007MGA
Price: $149 (Amazon)
Pros
- 5,800 RPM is the fastest in this class, producing cleaner cuts with less tearout
- Magnesium base plate stays dead flat and tracks true across long rip cuts
- Dust port connects to a shop vac for actual dust capture instead of just blowing chips around
Cons
- 10.6 lb is nearly 2 lb heavier than the DeWalt, and you'll feel it after an hour
- $20 more than the DWE575SB for a bare tool
- Slightly shallower cut depth at 2-1/2 inches (still clears 2x lumber)
Best For
Framing and rough carpentry
DeWalt DWE575SB
8.8 lb is noticeably lighter for one-handed cuts on rafters and headers. Cut quality is secondary here.
Finish carpentry and cabinet work
Makita 5007MGA
5,800 RPM and a flat magnesium shoe produce cleaner cuts in hardwood and plywood.
Indoor work where dust matters
Makita 5007MGA
Dust port hooks to a shop vac. The DeWalt's blower just redistributes the mess.
Carrying the saw up ladders and around sites
DeWalt DWE575SB
1.8 lb lighter. When you're climbing scaffolding, that difference is obvious.
Frequently Asked Questions
Why pick a corded saw over cordless in 2026?
Unlimited runtime and consistent power. Cordless saws are great for crosscuts and portability, but if you're ripping 30 sheets of 3/4-inch plywood, a corded saw won't slow down as the battery drains. It's also cheaper per cut since you're not wearing out $100+ batteries.
Can these cut 4x4 posts?
Not in one pass. A 4x4 is 3-1/2 inches actual. The DeWalt cuts 2-9/16 inches and the Makita cuts 2-1/2 inches at 90 degrees. You'll need to cut from two sides and snap the piece. A 10-inch miter saw or a reciprocating saw handles 4x4s cleanly.
Is the weight difference really noticeable?
Yes. 1.8 lb doesn't sound like much, but after 50 cuts on a framing job, you feel it in your wrist and forearm. The DeWalt is the saw to pick if you prioritize fatigue reduction over cut accuracy.