Bosch GTS1031 vs DeWalt DWE7485: Portable Table Saws Compared
FriendsWithTools.io earns a commission from qualifying purchases made through links on this page, at no additional cost to you. We do not test these tools ourselves — all claims are sourced from manufacturer specifications, retailer listings, and aggregated user reviews, each linked inline. Prices and ratings were verified on April 2026 and may have changed.
Portable table saws are the compromise between a full cabinet saw and a circular saw with a straight edge. The Bosch GTS1031 and DeWalt DWE7485 both run 10-inch blades, weigh under 60 lb, and fit in a truck bed. The Bosch prioritizes compactness with an integrated carry handle. The DeWalt prioritizes rip capacity with a wider fence range. Both rip 3/4-inch plywood cleanly.
Quick Verdict
The DeWalt DWE7485 is the better jobsite saw. More rip capacity, lighter weight, and $50 less covers the tradeoff of a slightly shallower cut depth. The 8-1/4 inch blade handles everything from plywood to 2x lumber. The Bosch GTS1031 wins if you need to cut 3x material or if the integrated carry handle and onboard storage matter more to you than rip capacity.
24-1/2 inch rip capacity handles half-sheets. The Bosch's 18 inches forces you to use a circular saw for wider rips.
Integrated carry handle and onboard storage for the fence and miter gauge means one trip from the truck.
$50 cheaper and more capable on rip width. Hard to argue against that combination.
3-1/8 inch depth at 90 degrees handles 3x material. The DeWalt's 2-5/8 inches can't.
Specs at a Glance
| Spec | Bosch GTS1031 | DeWalt DWE7485 |
|---|---|---|
| Blade Size | 10 in | 8-1/4 in |
| Rip Capacity (right of blade) | 18 in | 24-1/2 in |
| Depth of Cut (90 deg) | 3-1/8 in | 2-5/8 in |
| Depth of Cut (45 deg) | 2-1/4 in | 1-3/4 in |
| No-Load Speed | 5,000 RPM | 5,800 RPM |
| Weight | 52 lb | 48.5 lb |
| Motor | 15 Amp | 15 Amp |
| Table Size | 25 x 22 in | 26-1/4 x 22-1/2 in |
Bosch GTS1031
Price: $369 (Amazon)
Pros
- 52 lb with an integrated carry handle makes it genuinely one-person portable
- Smart Guard system combines blade guard, riving knife, and anti-kickback pawls in one unit
- Onboard storage for the fence, miter gauge, and push stick so nothing gets lost on site
Cons
- 18-inch rip capacity limits you on wider sheet goods without outfeed support
- Smaller table surface requires aftermarket extensions for large panels
- $369 is $50 more than the DeWalt for a smaller rip capacity
DeWalt DWE7485
Price: $319 (Home Depot)
Pros
- 24-1/2 inch rip capacity rips a full half-sheet of plywood without outfeed support
- 48.5 lb is the lightest table saw in its class by a meaningful margin
- 5,800 RPM on an 8-1/4 inch blade produces an exceptionally smooth cut surface
Cons
- 8-1/4 inch blade limits maximum depth of cut to 2-5/8 inches (no 3x lumber)
- Smaller blade means fewer specialty blade options compared to 10-inch
- Rack-and-pinion fence is accurate but feels looser than the Bosch fence lock
Best For
Ripping sheet goods on site
DeWalt DWE7485
24-1/2 inch rip capacity handles half-sheets. The Bosch's 18 inches forces you to use a circular saw for wider rips.
One-person setup (carrying in and out daily)
Bosch GTS1031
Integrated carry handle and onboard storage for the fence and miter gauge means one trip from the truck.
Budget-conscious purchase
DeWalt DWE7485
$50 cheaper and more capable on rip width. Hard to argue against that combination.
Cutting thick stock (3x lumber, laminated beams)
Bosch GTS1031
3-1/8 inch depth at 90 degrees handles 3x material. The DeWalt's 2-5/8 inches can't.
Frequently Asked Questions
Why does the DeWalt use an 8-1/4 inch blade?
DeWalt designed the DWE7485 for maximum portability. The smaller blade lets them shrink the motor housing and reduce weight by 3.5 lb compared to most 10-inch portables. The tradeoff is a shallower max cut depth, which only matters if you cut 3x stock.
Can I use a dado stack on either saw?
The Bosch GTS1031 does not accept dado stacks. The DeWalt DWE7485 doesn't either, due to the 8-1/4 inch arbor limitations. For dado cuts on a jobsite saw, you'll need a full-size 10-inch contractor saw with a longer arbor.
Do I need a table saw stand?
Both can sit on a pair of sawhorses or a workbench. Dedicated rolling stands ($100 to $200) are worth it if you set up and tear down daily. The Bosch has a direct-mount bracket for Bosch's own gravity-rise stand.