FriendsWithTools.io earns a commission from qualifying purchases made through links on this page, at no additional cost to you. We do not test these tools ourselves — all claims are sourced from manufacturer specifications, retailer listings, and aggregated user reviews, each linked inline. Prices and ratings were verified on May 2026 and may have changed.
We compare four jobsite table saws that cover the range from compact portability to maximum rip capacity. Specs come from manufacturer data sheets. Prices were checked across Home Depot, Lowe's, and Amazon in May 2026. Owner feedback comes from those same retailers plus woodworking forums. We have not tested these saws ourselves.
We started with the best-selling jobsite table saws at Home Depot and Lowe's, then filtered by fence quality (rack-and-pinion only, no cam-lock fences), owner satisfaction (4.0+ stars with 500+ reviews), and availability in 2026. That narrowed the field to these four. Each serves a different primary use case.
Specs: 15-amp motor, 10-inch blade, 32.5-inch rip capacity, rack-and-pinion fence, rolling stand included. 90 lbs total.
Price: $350-$450 (Home Depot, Lowe's, Amazon as of May 2026).
Reviews: 4.7 stars across 12,000+ reviews on Home Depot. The most-reviewed jobsite table saw available. Owners consistently praise the fence alignment and the fact that it stays parallel across the full 32.5 inches of rip capacity. The stand folds and rolls, though it's not as elegant as the Bosch gravity-rise. Motor power handles 3/4-inch hardwood without bogging.
Pros: 32.5-inch rip capacity is the widest in this price range. The rack-and-pinion fence locks accurately and stays put. The rolling stand makes transport manageable for one person. Dust port works well when connected to a shop vac. 15-amp motor handles hardwood ripping at reasonable feed rates.
Cons: The stand is functional but takes more steps to deploy than the Bosch. Dust collection without a vac connected is poor (chips go everywhere). The miter gauge that comes with it is mediocre; most serious users replace it. At 90 lbs total, it's not light. Aluminum table top means it's less flat than cast iron over time.
Specs: 15-amp motor, 10-inch blade, 25-inch rip capacity, rack-and-pinion fence, rolling stand included. 85 lbs total.
Price: $350-$400 (Home Depot exclusive, as of May 2026).
Reviews: 4.5 stars, 3,800+ Home Depot reviews. The Lifetime Service Agreement is the headline feature. Register within 90 days and Ridgid covers the motor, parts, and service for the life of the tool. Owners who've used the warranty report straightforward claims. The saw itself performs in the mid-range: fence is accurate, motor handles standard work, rip capacity is enough for half-sheet plywood cuts.
Pros: The Lifetime Service Agreement covers motor burnout, which is the #1 failure mode on jobsite saws after years of heavy use. A replacement motor alone is worth $100-200. Fence is accurate and holds alignment. The stand is sturdy. Dust collection port is well-positioned. Home Depot carries replacement parts and blades in store.
Cons: 25-inch rip capacity limits you to half-sheet cuts with no extra room. Home Depot exclusive means no price shopping. The LSA requires registration within 90 days (easy to forget). Weighs slightly less than the DeWalt but the stand is bulkier. The 18V Ridgid battery platform is smaller than DeWalt or Milwaukee if you're building out a cordless ecosystem.
Specs: 15-amp motor, 10-inch blade, 25-inch rip capacity, SquareLock rack-and-pinion fence, gravity-rise stand included. 103 lbs total.
Price: $500-$600 (Home Depot, Lowe's, Amazon as of May 2026).
Reviews: 4.6 stars, 5,200+ reviews across retailers. The gravity-rise stand is the selling point. One motion to deploy, one motion to fold. On job sites where you set up and tear down every day, it saves real time. The SquareLock fence system is precise. Cutting performance matches the DeWalt (same 15-amp motor, same blade size). The premium price is for the stand and the Bosch fence quality.
Pros: The gravity-rise stand is the fastest deploy/fold system available. SquareLock fence is very accurate and locks confidently. The motor runs smooth and quiet relative to other 15-amp units. Dust collection is slightly better than the DeWalt. Build quality feels substantial.
Cons: $150-200 more than the DeWalt for the same motor and blade. 25-inch rip capacity (vs. DeWalt's 32.5) means you're paying more and getting less rip width. At 103 lbs total, it's the heaviest saw here. The gravity-rise stand wheels are smaller and can struggle on rough terrain. Replacement parts are harder to find than DeWalt.
Specs: 15-amp motor, 8.25-inch blade, 24.5-inch rip capacity, rack-and-pinion fence. 48 lbs (saw only, no stand included).
Price: $300-$370 (Home Depot, Lowe's, Amazon as of May 2026).
Reviews: 4.6 stars, 6,400+ reviews. Owners who prioritize portability over cutting depth love this saw. At 48 lbs without a stand, one person carries it easily. The 8.25-inch blade cuts 2.5 inches at 90 degrees, which handles 2x material but barely. The fence is the same rack-and-pinion system as the larger DeWalt. It's a real table saw in a compact form factor.
Pros: Lightest table saw here by a wide margin (48 lbs). One person carries and sets it up without help. Rack-and-pinion fence is accurate. 24.5-inch rip capacity still handles half-sheet plywood. Same 15-amp motor as the bigger models. Fits in tight truck beds and small shops.
Cons: 8.25-inch blade limits cutting depth to 2.5 inches. It cannot make beveled cuts through a full 2x4 (a 10-inch blade can). No stand included (sold separately for $100-150). Fewer blade options available in 8.25-inch compared to 10-inch. The smaller table surface makes supporting large workpieces harder. Not the saw for thick hardwood or stacked cuts.
DeWalt DWE7491RS - $350-$450
32.5-inch rip capacity. Rips full plywood panels without a second pass. The standard jobsite saw for woodworkers.
Ridgid R4520 - $350-$400
Lifetime Service Agreement covers motor replacement. If you use it for years, the warranty pays for itself.
Bosch 4100XC-10 - $500-$600
Gravity-rise stand deploys in one motion. Worth the premium if you set up and tear down daily.
DeWalt DWE7485 - $300-$370
48 lbs, 8.25-inch blade. Carry it with one hand. Sacrifices cutting depth for true portability.
| Spec | DeWalt DWE7491RS | Ridgid R4520 | Bosch 4100XC-10 | DeWalt DWE7485 |
|---|---|---|---|---|
| Motor | 15-amp, 120V | 15-amp, 120V | 15-amp, 120V | 15-amp, 120V |
| Blade Size | 10" | 10" | 10" | 8.25" |
| Rip Capacity | 32.5" | 25" | 25" | 24.5" |
| Cut Depth (90°) | 3.125" | 3.125" | 3.125" | 2.5" |
| Fence Type | Rack-and-pinion | Rack-and-pinion | SquareLock (rack-and-pinion) | Rack-and-pinion |
| Weight | 90 lbs (with stand) | 85 lbs (with stand) | 103 lbs (with stand) | 48 lbs (saw only) |
| Price Range | $350-$450 | $350-$400 | $500-$600 | $300-$370 |
This guide covers jobsite (portable) table saws because they are what 90% of buyers need. If you have a dedicated shop and budget for a permanent saw, contractor saws ($800-2,000) give you cast-iron tops, more rip capacity, and less vibration. Cabinet saws ($2,000-5,000) are production shop tools with 3-5 HP motors. For more on the types, see our table saw guide.
The DeWalt DWE7491RS. Rack-and-pinion fence, 32.5-inch rip capacity, rolling stand included, 15-amp motor. It costs $350-450 and handles everything from framing to cabinet work. The fence stays parallel across the full rip width, which is what separates it from cheaper options.
Yes, if you shop at Home Depot and register within 90 days. The Lifetime Service Agreement covers the motor, parts, and labor for the life of the tool. Table saw motors burn out after heavy use, and a free replacement motor alone is worth $100-200. The saw itself is mid-range in specs but the warranty makes it a long-term value play.
If you rip plywood sheets, yes. A 4x8 sheet is 48 inches wide. You need 24.5 inches minimum to rip it in half. The DeWalt DWE7491RS gives you 32.5 inches, which means you can cut plywood down to any width in one pass from the center out. The Ridgid R4520 and Bosch 4100XC-10 both offer 25 inches, which still handles half-sheets but limits wider offcuts.
The Bosch 4100XC-10 gravity-rise stand deploys and folds with one motion. You grab a handle, the saw rises to working height on wheeled legs, and locks. To collapse it, you unlock and it folds down. No bolts, no assembly. On job sites where you set up and tear down daily, this saves 5-10 minutes each way. Other stands require unfolding legs, locking braces, and sometimes removing the saw to fold.
Yes, with limits. A 15-amp jobsite motor handles 3/4-inch hardwood (oak, maple, walnut) without issues. It will slow down slightly on 2-inch thick hardwood but gets through it. Feed rate matters: push slowly and let the blade do the work. A sharp blade (40-tooth combination or 24-tooth rip) makes the difference between clean cuts and burnt edges. Cabinet saws handle thick hardwood better because they have more sustained torque.
The saw head itself weighs 45-65 lbs depending on the model. With a rolling stand, total weight is 80-110 lbs. The DeWalt DWE7491RS is 90 lbs total (saw + stand). The Bosch 4100XC-10 is 103 lbs total. One person can wheel any of these into a truck bed, but lifting the saw head off the stand is a two-person job on the heavier models.