FriendsWithTools.io earns a commission from qualifying purchases made through links on this page, at no additional cost to you. We do not test these tools ourselves — all claims are sourced from manufacturer specifications, retailer listings, and aggregated user reviews, each linked inline. Prices and ratings were verified on April 2026 and may have changed.
Six cordless right-angle drills compared using manufacturer specs and aggregated user reviews. Prices checked across Home Depot, Amazon, and Lowe's as of April 2026. All prices are bare tool (no battery).
We pulled specs from official data sheets, verified prices across three retailers, and aggregated user reviews from electricians, plumbers, and remodelers on Amazon, Home Depot, and trade forums. Focus areas: head compactness, torque under load, and ergonomics in tight spaces. No in-house testing.
Specs: Max Torque: 650 in-lbs, RPM (Speed): 0-450 / 0-1,500, Chuck: 3/8", Head Length: 4.0", Weight (bare): 3.7 lbs.
Price: $100-140 (Home Depot, Amazon, April 2026).
Reviews: 4.5 stars, 5,600 Amazon reviews. Electricians call it the standard right-angle drill for residential wiring. The head fits between studs without issue. Users praise the 2-speed transmission and battery life. Common complaint: the 3/8-inch chuck limits bit options for plumbing work.
Pros: Compact 4-inch head. 2-speed transmission for control and speed. 20V MAX platform for battery compatibility. Light at 3.7 lbs. Widely available.
Cons: 3/8-inch chuck limits self-feed bit use. 650 in-lbs is moderate. Not enough torque for large-diameter boring in hardwood.
Specs: Max Torque: 750 ft-lbs, RPM (Speed): 0-500 / 0-1,200, Chuck: 1/2" QUIK-LOK, Head Length: 4.5", Weight (bare): 5.2 lbs.
Price: $140-180 (Home Depot, Amazon, April 2026).
Reviews: 4.6 stars, 3,800 Amazon reviews. Plumbers and remodelers rely on it for running self-feed bits through multiple studs. The QUIK-LOK chuck accepts both standard and Milwaukee-specific bits. Users say nothing else cordless matches its torque. Main complaint: it's heavy for overhead work.
Pros: Highest torque in any cordless right-angle drill. 1/2-inch QUIK-LOK chuck for self-feed bits. M18 FUEL brushless motor. Excellent for plumbing and HVAC runs.
Cons: Heaviest right-angle drill here at 5.2 lbs. Most expensive. 4.5-inch head is slightly larger. Overkill for basic electrical drilling.
Specs: Max Torque: 560 in-lbs, RPM (Speed): 0-500 / 0-1,600, Chuck: 1/2", Head Length: 4.2", Weight (bare): 4.5 lbs.
Price: $130-170 (Amazon, Home Depot, April 2026).
Reviews: 4.4 stars, 1,600 Amazon reviews. Users praise the auto-torque-drive feature that adjusts power based on load. The 1/2-inch chuck handles self-feed bits at a lighter weight than the Milwaukee. Some note the 18V LXT battery line is smaller than DeWalt or Milwaukee.
Pros: 1/2-inch chuck at a lower weight than Milwaukee. Auto-torque-drive reduces user effort. 2-speed transmission. Good ergonomics.
Cons: Less torque than Milwaukee. Smaller battery ecosystem. Higher price for the power delivered. Fewer reviews and long-term reliability data.
Specs: Max Torque: 275 in-lbs, RPM (Speed): 0-1,300, Chuck: 3/8", Head Length: 2.9", Weight (bare): 2.0 lbs.
Price: $90-130 (Home Depot, Amazon, April 2026).
Reviews: 4.3 stars, 2,400 Amazon reviews. Electricians working in tight junction boxes and crowded panel areas love the 2.9-inch head and featherweight 2.0 lbs. The 12V battery limits power and runtime. Not suitable for heavy boring, but unmatched for accessibility.
Pros: Smallest right-angle drill available at 2.9-inch head. Lightest at 2.0 lbs. Fits in spaces no 18V model can reach. Good for electrical work, HVAC connections, and cabinet installation.
Cons: 12V platform limits torque (275 in-lbs) and runtime. Single-speed. Cannot run self-feed bits. Battery ecosystem is separate from 18V tools.
Specs: Max Torque: 380 in-lbs, RPM (Speed): 0-1,100, Chuck: 3/8", Head Length: 3.8", Weight (bare): 3.3 lbs.
Price: $50-70 (Lowe's, Amazon, April 2026).
Reviews: 4.1 stars, 1,900 reviews across Amazon and Lowe's. Homeowners and weekend electricians say it does the job for occasional stud-bay drilling. The price is hard to beat. Users note the motor is brushed and less efficient than brushless competitors, and it lacks a 2-speed transmission.
Pros: Cheapest right-angle drill by a wide margin. ONE+ battery if you already own Ryobi tools. Light at 3.3 lbs. Adequate for occasional residential electrical work.
Cons: Brushed motor. Single-speed (0-1,100 RPM only). 380 in-lbs is marginal for hardwood studs. Not for professional daily use.
Specs: Max Torque: 500 in-lbs, RPM (Speed): 0-450 / 0-1,400, Chuck: 3/8", Head Length: 3.9", Weight (bare): 3.8 lbs.
Price: $80-120 (Home Depot, April 2026).
Reviews: 4.3 stars, 1,400 Home Depot reviews. Users appreciate the brushless motor and Lifetime Service Agreement at a price below the DeWalt and Milwaukee. 500 in-lbs handles standard electrical and light plumbing work. Some note the 3/8-inch chuck limits self-feed bit options.
Pros: Brushless motor at a mid-range price. Lifetime Service Agreement covers batteries. 2-speed transmission. Compact 3.9-inch head. Good value per dollar.
Cons: 3/8-inch chuck limits large bit use. Home Depot exclusive. Less torque than Milwaukee or Makita. Smaller battery ecosystem.
| Spec | DeWalt DCD740B | Milwaukee 2807-20 | Makita XAD06Z | Bosch PS11-102 | Ryobi P241 | Ridgid R86711B |
|---|---|---|---|---|---|---|
| Max Torque | 650 in-lbs | 750 ft-lbs | 560 in-lbs | 275 in-lbs | 380 in-lbs | 500 in-lbs |
| RPM (Speed) | 0-450 / 0-1,500 | 0-500 / 0-1,200 | 0-500 / 0-1,600 | 0-1,300 | 0-1,100 | 0-450 / 0-1,400 |
| Chuck | 3/8" | 1/2" QUIK-LOK | 1/2" | 3/8" | 3/8" | 3/8" |
| Head Length | 4.0" | 4.5" | 4.2" | 2.9" | 3.8" | 3.9" |
| Weight (bare) | 3.7 lbs | 5.2 lbs | 4.5 lbs | 2.0 lbs | 3.3 lbs | 3.8 lbs |
DeWalt DCD740B. Compact head, light weight, 2-speed transmission, and the 20V MAX platform covers most electrical drilling needs. If you work in very tight spaces (old homes, crowded panels), the Bosch PS11-102 fits where nothing else can, but it trades power for size.
Milwaukee 2807-20. The 1/2-inch QUIK-LOK chuck and 750 ft-lbs of torque are built for self-feed bits. Nothing else cordless comes close for boring large drain holes through multiple studs. The Makita XAD06Z is a lighter alternative with a 1/2-inch chuck.
You could, but you shouldn't. Right-angle drills are slower and less comfortable for standard drilling and driving. They excel in tight spaces and nowhere else. Own a standard drill/driver for everyday work and add a right-angle drill when your projects require it.
Milwaukee's proprietary system that lets you swap between self-feed bits, spade bits, and standard chuck without tools. The QUIK-LOK base stays in the drill, and different attachments click in and out. It saves time when switching between bit types during framing work.
Use a stud finder with wire detection, or a non-contact voltage tester. Drill in the center of the stud to stay clear of code-required nail plates. In renovation work, assume every stud bay has something in it until you verify otherwise. A right-angle drill gives you better visibility and control than a regular drill in these situations.