FriendsWithTools.io earns a commission from qualifying purchases made through links on this page, at no additional cost to you. We do not test these tools ourselves — all claims are sourced from manufacturer specifications, retailer listings, and aggregated user reviews, each linked inline. Prices and ratings were verified on April 2026 and may have changed.
A drill/driver is the general-purpose cordless drill. It bores holes, drives screws, and handles light fastening. The adjustable clutch keeps you from over-driving into soft material. This page covers eight drill/drivers from the major brands, with specs from manufacturer data sheets and prices checked in April 2026.
A drill/driver combines a rotary drill and a screw driver in one tool. The clutch dial (usually 15-20 settings) lets you set a torque limit so the chuck stops rotating once the fastener reaches the right depth. Turn the dial to drill mode and the clutch disengages for full-torque boring. It's the most versatile single power tool you can own.
Weight runs 2.5 to 4.5 pounds depending on the model. Compact drill/drivers sacrifice some torque for lighter weight and smaller size. Full-size models deliver more power and accept larger chucks. The two-speed transmission is standard on mid-range and pro models: low gear for driving (0-400 RPM) and high gear for drilling (0-1,500+ RPM).
If you don't already own a power drill, buy a drill/driver. It handles 90% of what homeowners and light commercial users need. Add specialized drills (hammer drill, right-angle drill, impact driver) later as your projects demand them.
We break down specs, prices, and trade-offs in our best drill/drivers guide.
The clutch dial limits torque so you stop driving a screw at the right depth. More settings (16-20) give finer control. Budget drills may have 10-12 settings. For drywall, you want a low setting so you don't punch through the paper facing. For hardwood, crank it up. The drill mode bypasses the clutch entirely for maximum torque.
Two-speed transmission is the standard you want. Low speed (0-400 RPM) for driving screws with control. High speed (0-1,500+ RPM) for drilling holes quickly. Budget drills sometimes skip the second speed, which limits versatility. Variable speed through the trigger gives you additional control within each gear.
3/8-inch chucks cover most bits and keep the drill compact. 1/2-inch chucks accept larger bits for construction drilling. For home use and light commercial work, 3/8-inch is fine. If you regularly drill holes larger than 3/8 inch in hardwood or metal, get a 1/2-inch chuck.
2.5 to 4.5 pounds bare tool. Under 3.5 lbs is comfortable for overhead work and one-handed use. Over 4 lbs provides more stability but tires your wrist during long sessions. The weight on the spec sheet is bare tool, so add battery weight (0.5-1.5 lbs depending on capacity) for the real number.
Brushed motors are cheaper and work fine for occasional use. Brushless motors cost $30-60 more but last longer, run cooler, and get 20-30% more runtime per battery charge. If you use your drill weekly, brushless pays for itself. For occasional home use, brushed is adequate.
A drill/driver has an adjustable clutch that limits torque for driving screws. A plain drill runs at full torque in all modes. The clutch is what makes a drill/driver good at both drilling holes and driving fasteners without over-driving or stripping.
$50-90 gets you a capable drill/driver. The DeWalt DCD771C2 kit at $60-90 includes two batteries, a charger, and enough torque for most home projects. Spending under $40 usually means a brushed motor with limited torque and no two-speed. Spending over $120 gets you pro-grade features most homeowners won't use.
Start low and work up. For drywall screws, settings 3-5 prevent punch-through. For softwood, 6-10. For hardwood, 12-16. For drill mode (boring holes), set the dial past the numbered settings to the drill icon. Every drill is different, so test on scrap material before driving into your actual workpiece.
Most homeowners don't. A 3/8-inch chuck handles standard drill bits and driver bits for screws, bolts, and anchors. You only need 1/2-inch if you regularly drill holes larger than 3/8 inch in hardwood or metal, or if you use hole saws.
A 1.5Ah battery lasts 30-45 minutes of moderate use. A 2.0Ah battery gets you about an hour. A 4.0Ah battery runs 1.5-2.5 hours. Drilling into hardwood and driving long screws drain the battery faster than light fastening. For home use, 2.0Ah is plenty. Keep a spare on the charger if you have a big project.